Doppelsperrrohrklemme (Rohrreparatur mit einer 2 -Schleusen -Kopplung des aktiven Dichtungssystems)
Technischer Parameter:Grip-d 【Ansicht】
Doppelsperrrohrklemme (Rohrreparatur mit einer 2 -Schleusen -Kopplung des aktiven Dichtungssystems)
Geeignet für Rohre OD φ180-φ2032mm
The advantage of GRIP-D repair clamps is that is can befitted to existing pipes in situation, without any need to remove and replacing pipes, GRIP-R pipe repair clamp can repair the pipes that are ageing and corrosive and pipe wall has holes or cracks . When installing it, it only needs pipe clamp to wrap the leakage part and tighten the bolt. Then the installation is finished ideally and reliably.
| Klemmgebiet | Arbeitsdruck | Produkt OD | Breite | Abstand zwischen Versiegelungsschläfen | Bolzen | |||||||
| Od | Min-Max |  |  | Φ d | B | C | ohne Streifeneinsatz | mit Streifeneinsatz (max) | ||||
| （Mm） | (In.) | （Mm） | (Bar) | (Bar) | (mm) | (mm) | (mm) | (mm) | (mm) | (mm) | (NM) | M |
| 180 | 16 | 30 | 204 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | M12 × 2 | ||
| 200 | 7.874 | 198-202 | 16 | 30 | 224 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | |
| 8.626 | 16 | 30 | 142 | 250 | 75 | 10 ～ 25 | 40 | 60 | ||||
| 250 | 9.843 | 247-253 | 16 | 25 | 282 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 10.512 | 16 | 25 | 299 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 273 | 10.748 | 270-276 | 16 | 25 | 305 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 304 | 11.969 | 301-307 | 10 | 20 | 336 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 323.9 | 12.752 | 320-327 | 10 | 20 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||
| 355.6 | 14.000 | 8.5 | 16 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |||
| 377 | 14.843 | 375-379 | 8.5 | 16 | 409 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 406.4 | 16.000 | 402-411 | 7.5 | 16 | 438 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | |
| 457.2 | 18.000 | 452-462 | 6.5 | 12 | 142 | 250 | 75 | 10 ～ 25 | 40 | 80 | ||
| 508 | 20.000 | 503-513 | 6 | 10 | 540 | 142 | 250 | 75 | 10 ～ 25 | 40 | 120 | |
| 558.8 | 22.000 | 554-564 | 5.5 | 10 | 590.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |
| 24.000 | 605-615 | 5 | 10 | 641.6 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | ||
| 708-715 | 4 | 5 | 743.2 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||
| 762 | 30.000 | 758-766 | 4 | 5 | 794 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |
| 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||||
| 914.4 | 36.000 | 4 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 160 | |||
| 1016 | 40.000 | 4 | 5 | 1048 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | ||
| 1117.6 | 44.000 | 1113-1122 | 3.5 | 5 | 1149.6 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | |
| 1219.2 | 1215-1224 | 3.5 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 200 | |||
| 1320.8 | 52.000 | 3 | 5 | 1352.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1422.4 | 1418-1427 | 3 | 5 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||
| 1524 | 60.000 | 2.5 | 5 | 1556 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 2.5 | 5 | 1657.6 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||||
| 1722-1732 | 2.5 | 5 | 1759.2 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |||
| 72.000 | 1824-1834 | 2 | 5 | 1860.8 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
| 1930.4 | 76.000 | 1925-1935 | 2 | 5 | 1962.4 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | |
| 2032 | 80.000 | 2 | 5 | 2064 | 142 | 250 | 75 | 10 ～ 25 | 40 | 240 | ||
Grip-D-Materialauswahl
| V1 | V2 | V3 | V4 | V5 | V6 | |
| Gehäuse | AISI 316L | AISI 316L | Aisi 316ti | |||
| Bolzen | AISI 316L | AISI 4135 | ||||
| Barren | AISI 316L | AISI 4135 | ||||
| Streifeneinsatz (optional) |
| Dichtungsmaterial | Medien | Temperaturbereich |
| EPDM | ||
| NBR | ||
| MVQ | Hochtemperaturflüssigkeit, Sauerstoff, Ozon, Wasser und so weiter | |